XF Series joystick

The XF Series joystick is a ruggedized finger operated joystick controller specifically engineered for vehicle applications. This new series is designed per the ISO 25197 standard and is rated to withstand 80lbf pull force across the X/Y axis and over 5Nm torque in the Z axis. With contactless Hall effect sensing, the XF Series provides long life proportional control for over five million lifecycles and is sealed up to IP67.

MAIN FEATURES

• Rugged design for vehicle applications
• Up to three axis
• CAN bus J1939 & CANopen protocol options
• USB protocol option
• Panel sealed up to IP67

GENERAL SPECIFICATION

• Break Out Force: 1.3N (0.3lbf)
• Operating Force: 2.8N (0.63lbf)
• Maximum Applied Force: 350N (78.00lbf)
• Deflection Angle: 36º (18º from center)
• Expected Life: 5 million
• Lever Action: Single spring, omnidirectional

ENVIRONMENTAL SPECIFICATIONS

• Operating Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
• Storage Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
• Sealing (IP): Up to IP67 above panel (subject to final specifications)
• EMC Immunity Level (V/M): EN61000-4-3
• EMC Emissions Level: EN61000-6-3:2001
• ESD: EN61000-4-2
• Output linearity: ±200mV
• Dual output interlinearity (X/Y): ±400mV
• Dual output interlinearity (Z): ±600mV

ELECTRICAL SPECIFICATIONS

• Sensor: Hall effect, single or dual
• Supply Voltage Range: 5VDC±0.01VDC
• Supply Current: 15mA, +10mA per axis (single sensor)
• Reverse Polarity Max: -10VDC
• Transient Overvoltage Max: 16VDC
• Ratiometric Output Voltage: See output options
• Output Impedance: 2Ω

MATERIALS

• Shaft: Stainless Steel
• Boot: Silicone
• Handles: Glass filled nylon*
• Body: Glass filled nylon

*most handles, dependent upon configurations

MECHANICAL SPECIFICATIONS

X / Y Axis
• Break Out Force: 1.3N (0.3lbf)
• Operating Force: 2.8N (0.63lbf)
• Maximum Applied Force: 350N (78.00lbf)
• Deflection Angle: 36º (±18º from center)
• Expected Life: 5 million
• Lever Action: Spring centering, omnidirectional

Z Axis
• Break Out Torque: 0.09Nm (0.80lbf in)
• Operating Torque: 0.121Nm (1.07lbf in)
• Maximum Allowable Torque: 9.0Nm (80lbf in)
• Hand Mechanical Angle: 60º (30º from center)
• Expected Life: 5 million
• Handle Action: Spring centering

Part Numbers